www.newsforrc.net

Archive for the ‘Tamiya 雙星’ Category

Tamiya Japan - Fire Dragon 2008

Posted on Feb 25, 2008 04:57:09 PM

Available : Mar 1, 2008
【 走りも熱い入門用4WDバギー 】 マンガ「ラジコンボーイ」の主人公、車剛のマシンとして1989年にモデル化された入門用4WDバギー、ファイヤードラゴンの復刻版です。個性的なフォルムはマンガそのまま、ドライバー人形が走りの実感を高めます。また、名前のように炎をイメージしたマーキング用の大型シールもセット、カラフルな仕上げを気軽に楽しめます。
【 組み立て&整備が手軽なシャフトドライブ4WDシャーシ 】 シャーシはモーターをミドシップマウントして、パワー伝達にシャフトを使用するフルタイム4WD。バスタブタイプのフレームを採用して、RCメカの組み込みや手入れがしやすいのもポイントです。サスペンションはアッパー・Iアーム、ロワ・Hアームのシンプルな構成ながら、接地性に優れた4輪ダブルウィッシュボーン。4本のCVAオイルダンパーに加えて、フロント・スタビライザーを装着してしなやかな走りを実現します。また前後の密閉式ギヤケースにはユニット式デフギヤを内蔵。高い耐久性に加えて、スムーズな差動によりクセのない操縦性を発揮します。さらにギヤケースをコンパクトにしてロードクリアランスを確保。4WDともあいまって高い悪路走破性を生み出しています。

Basic specifications

  * - Total length =390mm
  * - full-width =240mm
  * - total height =139mm
  * - drive system = shaft drive 4WD
  * - suspension = 4 wheel double wishbone
  * - tire width/also diameter = front and back 38/73mm
  * - diff. gear system = front and back 3 bevel diff.
  * - 540 type motor attachments

Source : Tamiya

ADBanner_4

Tamiya - DB01 BALDRE

Posted on Feb 25, 2008 04:34:14 PM

Following the recent successful launch of the DB01 chassis buggy Durga, our designers are now preparing the 2nd release, Baldre (pronounced as “Baldr” or “Baldur” as in the diety in Norse mythology). While the body parts set (ITEM 51338) was previously introduced, we now officially announce the complete assembly kit. With fully-enclosed twin belt drivetrain and other innovations developed from the race-proven TRF501X, this buggy puts TRF racing features in the hands of everyday racers.
* All-new DB01 chassis locates heavy components such as battery and motor near the center for optimum weight distribution.
* Race-proven and reliable 2-belt driven 4WD system features equal-length drive belts and is completely enclosed with ABS resin covers to prevent dirt and debris from interfering with drivetrain operations.
* Chassis features integrated bulkheads, which reduces the number of parts and simplifies maintenance.
* Tough ABS resin 4-wheel double wishbone suspension system features the same configuration as the race-proven TRF501X and provides a wide range of settings options.
* Full ball bearings to reduce friction loss for enhanced efficiency.
* New buggy body with rear wing is made from lightweight polycarbonate material.
* Wheels, tires, and Type 540 motor are included.
* 2-channel transmitter, ESC, running battery & charger are separately required.

Source : Tamiya

ADBanner_3

Team Losi - LST2 Monster Truck RTR

Posted on Feb 25, 2008 04:07:54 PM

LST2 Monster Truck RTR w/XS3
LST2 Super Truck RTR with Mach 427 Engine & JR XS 3 Synthesized RadioThe Losi LST2 is the next generation of big block nitro horsepower and ingenious design, bringing you the most advanced monster truck ever conceived. Taking Losi’s original “2005 Truck of the Year” LST to the next level of performance, the LST2 features a potent new Mach 427 engine, newly designed driveshafts and axles for added strength, 20mm anodized aluminum wheel hexes, bulletproof aluminum differential cases, 420-Series dish wheels and racing tires, beefed up suspension components and much more. Aluminum clutch shoes offer long life and strong, positive engagement to harness the power, directed through a revolutionary transmission that shifts on the fly while climbing rocky inclines or blasting across the flats at speeds over 40 MPH. And you will stay in precise control the entire time with JR’s premium XS3 synthesized computer FM radio system.

The LST2 is the complete, high-performance, ready-to-run package that monster truck racers have been looking for.

Source: Team Losi
Read the rest of this entry »

ADBanner_3

Tamiya Japan - XB Plasma Edge

Posted on Feb 19, 2008 05:08:20 PM

Buggy 4WD of the enhancement equipment that doesn’t choose the running place
It runs through lightly on the road that gets rough, and completion and electric radio control 4WD that easily handles the Big jump is baggy. It excels in road holding, and length putting motor shaft drive 4WD with high reliability is adopted. Coloring to distribute the checkers pattern to a basic color of silver produces the speed feeling, and the body that stands out particularly in the off-road is a charm, too.

4WD Shaft Drive DF-02 Chassis
Adopting the RC mechanic and low the bathtub frame of center of gravity which loads the battery for travelling onto flat wide-tread. As for suspension 4 wheel double wishbone of long arm. It moves pliantly even in the road surface which becomes rough, high grip goes hand in hand with the pin spike tire and pulls out high traction. In addition, the diff. gear which promises smooth cornering was built in to the gear box front and back. Furthermore, loading the speed controller “Tamiya TEU101BK” whose back travelling is possible in the body including the transmitter of the wheel trigger type which is suited for the operation of the car. Also the 7.2V battery and the private charger for travelling being attached, producing from the box, if it charges the battery, it can enjoy running directly.

Specification :

* - Total length =400mm
  * - the full-width =249mm
  * - total height =170mm
  * - the chassis material =ABS
  * - suspension = front and back is attached double wishbone 4 wheel independence
  * - the drive system = shaft drive 4WD
  * - 540 type motors,
  * - tire width/diameter = front after 41/86mm 32/86mm

* power source for the transmitter (8 single type 3 electric batteries) the difference sale

Source : Tamiya

Tamiya Japan - Nismo Coppermix SILVIA TB-02

Posted on Feb 16, 2008 11:14:37 AM

Available Feb 23, 2008
Translation :
The Drift is bright by light lighting
A lot of tune-up parts including the super-kappa mix clutch that surely catches the power of the high power engine and pursues easiness to treat are installed. It is an assembly kit of the electric radio control car that reproduces Nismo COPPERMIX Silvia that Nismo that took charge of motor sports of Nissan finished up by 1/10 scales. Being able to enjoy the drift running easily like the name is a charm. The body that reproduced a stylish form in the round is made of the polycarbonate. A gay marking was prepared in the sticker. In addition, two headlight lights (white) and two rear light lights (red) can be lit by equipping normally high luminance LED.

 Source : Tamiya

Read the rest of this entry »

Tamiya Japan - Neo Falcon

Posted on Feb 15, 2008 04:04:40 PM

The potential kept secret in ..Sharp.. form
Low Form where the edge is effective, furthermore the color ring of black & the lead-lead shows the body more low sharply. The electromotive radio control 2WD buggy which has the name of the bird and the falcon of most speed, it is the assembly kit of Neo-Falcon. In the bathtub frame which in center of gravity is superior low in weight balance, equipping the double wishbone 4 wheel independent suspension of oil damper equipment. Star design is unique is combined to Astoraldisshuhoel whose as for the tire which, the nosewheel is superior in directivity the wide grooved, rear wheel where high grip the square spike. The sharp body and the large-sized rear wing being lightweight, are the polycarbonate make which is strong in the shock. It does not choose the road surface and the light running enjoys fully, installing the part of selling separately, also efficiency rise is the possible 2WD buggy.

Source : Tamiya Japan

Read the rest of this entry »

Tamiya Japan - RAYBRIG NSX 2007 TA05-IFS

Posted on Jan 24, 2008 06:02:58 PM

Available Feb 2, 2008
Aerodynamics that the actually feeling pursuit body is excellent is invented
Activity as Dominic Shuwagar and Hosokawa Tstsshi both players drive, and it makes inroads into 2nd place in the 2nd, 4, and eight wars in super-GT in 2007. It is an electric radio control car assembly kit of lei Brick NSX where the excellent job in 3rd place was brought in the point ranking during the year of the driver. A low nose of a real similar car that falls a central part of the bonnet by one step is reproduced, and the body made of the polycarbonate is reproduced by a high scale feeling such as making forming and the duct that is called a shark louver located on the back of the headlight, low side lines, and Riyafendar that project greatly. In addition, a door mirror and large-scale Riyauing of unique shape tighten the form. Even the RC car of the style of actually feeling is demonstrating excellent aerodynamics certain.

Source: Tamiya 雙星

Read the rest of this entry »

Tamiya World Championships 2007 DVD

Posted on Jan 22, 2008 03:41:12 PM

2007年11月22〜24日静岡・ツインメッセ静岡にて開催された、『タミヤグランプリワールドチャンピオン決定戦2007』。全国15会場で開催された「タミヤグランプリ全日本選手権」を勝ち抜いた国内代表選手58名、欧州、米国、アジアの各国の大会を勝ち抜いた14名の代表選手が特設サーキットで、バギーヨンク、ミニスポーツ、GTビクトリーと、ワールドチャンピオンの懸かったGT2400、GT3700、5つのカテゴリーでレースが繰り広げられました。総収録時間4時間半を越えた4枚組DVDでお届けする迫力のレースシーンの数々、撮影は(株)タミヤ全面協力の下、TRFプロジェクトサポーターでもあるRCT-TVが担当。大迫力のオフィシャルDVDです。

(ITEM 66896)
【収録内容】
●各クラス予選1〜3ラウンド(ダイジェスト)、予選4ラウンド〜決勝3ラウンドを収録
●23日に行われたエキシビジョン『1時間耐久レース』を収録
●タイム計測画面を同時表示
【特別映像】
●TRF(タミヤレーシングファクトリー)メンバーのプロポ操作オンボード映像
●公式リザルト、参加選手の記念写真、開会式の風景など

【製品仕様およびご注意点】
●トールサイズDVDケース(4枚収納仕様)
●再生にはNTSC方式のDVDプレーヤー、またはDVDドライブとDVD再生用ソフトを装備したPCが必要です。

Source : Tamiya

Under Bumper for Tamiya TA-05, EVO, TRF415, 414

Posted on Jan 18, 2008 03:45:31 PM

For Tamiya TA-05, EVO

 

Source : Take Off

Jilles Groskamp選手加入TRF

Posted on Jan 8, 2008 12:38:35 PM

TRF(タミヤレーシングファクトリー)に、ヨーロッパ選手権や世界選手権などで好成績を残し、高いセッティング能力を持つオランダ人ドライバー、Jilles Groskamp(ジルス・グロスカンプ)選手が加入いたしました。
今年11月に開催されるIFMAR世界選手権ISTCクラスに向けて、力強い戦力となります。

2007年の主な成績

スノーバードツーリングカーPROモデファイドクラス 4位

ツーリングカーヨーロッパ選手権 4位

LRPマスターズ 4位

TITC 4位

TRF前住のコメント
新年から良いニュースをお届けできてうれしいです!!

何年か前、彼に会った時からそのセッティング能力には注目しており、今回の加入につながりました。

TRFでその力をフルに発揮してもらい、皆で力を合わせて世界タイトル奪回に尽力を尽くしたいと思います!!!

Locations of visitors to this page